Skip to main content
Net zero & ESG consultants · Worcester, operating UK‑wide 01905 935 016 · info@gogreenexperts.co.uk
Book your free workshop
  1. Home
  2. Knowledge Base
  3. Scopes 1, 2 and 3

Scope 1, 2 and 3 emissions explained.

Every reporting framework in use sorts emissions into the same three buckets. Knowing which bucket a given activity falls into is most of the work.

Explainer · about 5 minutes Last reviewed November 2026

The short answer

Scope 1 is emissions from sources you own or control — your boilers, your vehicles, your refrigerant leaks. Scope 2 is emissions from the energy you buy and consume, principally electricity. Scope 3 is everything else, up and down your value chain: purchased goods and services, business travel, commuting, waste, and the use of what you sell. For most UK businesses Scope 3 is the large majority of the total.

The three scopes come from the Greenhouse Gas Protocol, which is the standard almost every other framework defers to. SECR, ESOS, PPN 006, CDP, the SBTi and your largest customer's supplier questionnaire all use the same vocabulary, which is the one genuinely helpful thing about this area.

The division is not about how important an emission is. It is about who is responsible for reporting it, so that if every organisation in a chain reported its own figures, nothing would be double counted at the level of the economy.

Scope 1 — direct emissions

Fuel burnt in something you own or control. For a typical organisation that is:

  • Gas and oil burnt on site for heating, hot water or process heat
  • Fuel in company-owned or leased vehicles, plant and generators
  • Refrigerant losses from air conditioning and chillers
  • Process emissions, where the chemistry itself releases gas

Scope 1 is usually the smallest number and the easiest to evidence, because it comes off meter readings, fuel cards and F-gas service records. Refrigerants are the common omission — they do not appear on an energy bill, so they get forgotten until an assessor asks.

Scope 2 — purchased energy

The emissions released on your behalf at the power station, or at the heat network, for the energy you buy and consume. Electricity is almost always the whole of it.

Scope 2 is reported two ways and a complete inventory gives both:

  • Location-based — your consumption multiplied by the average grid intensity. It tells the truth about the physical grid.
  • Market-based — your consumption multiplied by the intensity of what you actually contracted for, which is how a renewable tariff backed by REGOs shows up as a lower figure.

Reporting only the market-based number, without the location-based one beside it, is the single most common way a published footprint gets challenged.

Scope 3 — everything else

The GHG Protocol splits Scope 3 into fifteen categories across upstream and downstream activity. Not all fifteen are relevant to any one organisation, and saying which ones are not relevant, and why, is part of a defensible inventory.

The categories that carry the weight for most UK mid-market businesses:

  • Purchased goods and services (cat. 1) — usually the largest single line, and usually estimated from spend to begin with
  • Capital goods (cat. 2) — plant, vehicles, fit-outs and IT
  • Fuel and energy related activities (cat. 3) — the upstream extraction and transmission behind your Scope 1 and 2
  • Upstream transport and distribution (cat. 4)
  • Waste (cat. 5), business travel (cat. 6) and employee commuting (cat. 7) — small in tonnage, high in visibility, and the ones staff ask about
  • Use of sold products (cat. 11) — for anyone selling something that consumes energy, this dwarfs everything else

Why Scope 3 causes the arguments

Because you do not own the data. A first Scope 3 estimate is normally built from spend data multiplied by sector-average emission factors, which is accepted practice and also fairly blunt: it implies that spending more with a supplier always emits more, which is exactly backwards as an incentive.

The improvement path is to replace spend-based estimates with supplier-specific figures for your largest categories, year on year. That is slow, and it is also where the actual reductions come from, which is why Scope 3 is simultaneously the least precise number in the inventory and the most important one.

A worked split

A 180-person professional services firm with one leased office will typically see something close to:

  • Scope 1 — a few percent, or nil if the building is all-electric
  • Scope 2 — five to ten percent
  • Scope 3 — the remainder, dominated by purchased services, IT, commuting and travel

Which is why a reduction plan that only addresses Scopes 1 and 2 is, for that firm, a plan addressing under fifteen percent of its emissions — and why a customer reading it will say so.

What this means for your organisation

If you are reporting for the first time, Scopes 1 and 2 are a weekend of data gathering. Scope 3 is a scoping exercise: decide which categories are material, state the ones that are not and why, and be explicit about which figures are estimated.

Check which regimes apply to you, or book the free half-day workshop and we will map your fifteen categories with you.

Scope 3 is where most inventories stall.

We have built Scope 3 inventories for organisations from fifty people to fifty thousand, every one of them to the GHG Protocol, with the assumptions written down.